12.8V 200Ah LiFePO4 Battery Pack
LiFePO4 Battery Parameter Table
| Description | Dimensions (L*W*H) | Packaging Information |
| Rated Energy: 2560Wh Cell: Prismatic LiFePO4 Terminal: M8 Configuration (Customizable): 4S1P, 4S2P Nominal Voltage & Capacity: 12.8V, 200Ah Max Charging Current: 200A Instantaneous Discharge Current: 400A Continuous Discharge Current: 200A Cycle Life: 6000 cycles Water & Dust Resistance: IP65 Charging Temperature: 0~45°C Discharge Temperature: -20~60°C Storage Temperature: -20~65 °C Operating Voltage Range: 10-14.6V Over-Charge Protection Voltage: 14.6V ± 0.05V Over-Discharge Protection Voltage: 10V ± 0.05V Battery Protection Temperature: 60°C ± 5°C | 355*245*180mm | Unit N.W.: Appr. 19kg Packing Qty: 1pc/ctn CTN Size: 577x252x265mm Outer CTN N.W.: 19kg Outer CTN G.W.: 19.80kg |
Not sure who to contact?
Message us on WhatsApp with the capacity you need, the quantity and the destination market. You will get the right configuration and a price, usually within the hour. You can also email sales@beeste.com — we reply within 24 hours.
WhatsApp +86 198 7641 4034WhatsApp +86 186 2035 9117Get a Quote
What 2560Wh means in a real system
2,560Wh covers roughly two days of the same load, or one day with a 12V fridge, an inverter and lighting running together. The 200A continuous rating allows about 2,560W of draw, and the 400A instantaneous figure is what starts a motor or a pump without the BMS tripping.
Who it suits
Heavy-duty off-grid installations and larger RV or marine banks where one pack replaces two smaller units and removes a parallel connection. Also supplied into telecom and security cabinets.
Before you order
- The stated -20°C to 60°C operating window is the cell range. Charging below freezing still needs the BMS to block, so confirm that behaviour.
- 10+ years of service life assumes a duty cycle. Ask what depth of discharge and cycle count that figure rests on.
- Weight matters at this capacity. Confirm handling provision against your channel's shipping thresholds.
Listing note
Two of these in parallel give 5,120Wh without moving to a 48V system. That is the upgrade path to document, because it is what turns a single-pack buyer into a repeat order.
Related reading
- portable power station certifications — the certification set buyers check before ordering.
- portable power station manufacturer — a 12-point checklist for verifying a factory.