12.8V 100Ah LFP battery wholesale

12.8V 100Ah LiFePO4 Battery Pack

12.8V 100Ah
Professional 12.8V 100Ah LiFePO4 battery providing 1280Wh for RV, Marine, and Solar energy storage systems.
Quantity
Contact Now
add to cart
High Performance: Features premium LiFePO4 cells with over 4000 deep cycles at 80% DOD.
 
Robust Protection: Built-in 100A BMS with over-charge, over-discharge, and 60°C thermal protection.
 
B2B Advantage: Standard 12V replacement for lead-acid batteries with 3x life and 1/3 weight.
 
LiFePO4 Battery Parameter Table
DescriptionDimensions
(L*W*H)
Packaging Information
Rated Energy: 1280Wh
Cell: Prismatic LiFePO4
Terminal: M8
Configuration (Customizable): 4S1P
Nominal Voltage & Capacity: 12.8V, 100Ah
Max Charging Current: 100A
Instantaneous Discharge Current: 200A
Continuous Discharge Current: 100A
Cycle Life: 6000 cycles
Water & Dust Resistance: IP65
Charging Temperature: 0~45°C
Discharge Temperature: -20~60°C
Storage Temperature: -20~65 °C
Operating Voltage Range: 10-14.6V
Over-Charge Protection Voltage: 14.6V ± 0.05V
Over-Discharge Protection Voltage: 10V ± 0.05V
Battery Protection Temperature: 60°C ± 5°C
220*115*148mmUnit N.W.: Appr. 9.60kg
Packing Qty: 1pc/ctn
CTN Size: 465x452x197mm
Outer CTN N.W.: 9.60kg
Outer CTN G.W.: 10.20kg

Not sure who to contact?

Message us on WhatsApp with the capacity you need, the quantity and the destination market. You will get the right configuration and a price, usually within the hour. You can also email sales@beeste.com — we reply within 24 hours.

WhatsApp +86 198 7641 4034WhatsApp +86 186 2035 9117Get a Quote

What 1280Wh means in a real system

1,280Wh is about a day of modest 12V load: a compressor fridge cycling at one third duty, LED lighting, a water pump and phone charging. The 100A BMS sets a ceiling of roughly 1,280W continuous, so a 1,000W inverter is comfortably inside the limit while a 2,000W inverter is not.

Who it suits

Drop-in replacement for lead-acid in existing 12V systems: RV house banks, marine electronics, camping setups and small solar sheds. The form factor is the reason buyers choose it, because the wiring and charger already exist.

Before you order

  • 4000+ deep cycles at 80% DoD is the cycle claim. Ask for the capacity retention figure at end of test.
  • Confirm the charger can be set to a lithium profile. A lead-acid equalisation stage will push the pack above its limit.
  • Terminal type and case dimensions decide whether it is a true drop-in. Send your existing battery's drawing.

Related reading